Turnovers

1. If the edges are too heavy, bring down by adjustments to one or more of following:
— edges of slice.
— deckle rules.
— suction box end deckles.
— headbox bleeders.
2. Check if dryer felt is too narrow or running too far to back or front of machine, not allowing dryer felt to cover sheet.
— center the felt or change it.
3. Allow sufficient tub size overflow to cover edge of sheet.
4. Remove any build-up of broke on dyer ends that prevent proper drying.
5. Tighten draws.
6. Stabilize the wet line.
See Grainy edges, reduction.