Bulk high

Dry creped sheets
1. Increase calendering.
2. Balance percent crepe, if possible.
3. Investigate possible changes to furnish.
Low density, flat sheets
1. Check that moisture and basis weight are standard.
2. Lower calender rolls or increase number of nips until desired bulk is obtained if finish permits.
3. Increase press loading.
4. Increase refining as free stock contributes to high bulk.
5. Use smoothing press if bulk is too high.
6. Investigate possible changes to furnish.
Wet creped
1. Tighten draws after creping doctor.
2. Investigate possible changes to furnish.